Squirrel Feeder


Return to project index
The plan for this project is free and can be found HERE!

The materials needed for the project

• 3/4" thick piece of wood at least 5" wide
• 1/4" thick piece of wood at least 3" wide
• 2" X 2" 1 1/2" long
• 1 1/4" flat head screws
• 1 - 10 or 12 penny galvanized nail
• Wood Glue
• Some small brads

Below are a few pictures and clicking on each one will take you to a larger one.

The size is 8" high by 6" wide

Start of the project with the boards before cutting.
project start

The boards cut and shaped.
The boards cut and shaped.

Parts are put together with wood glue.
Parts are put together with wood glue.

After the glue is set screws are used to reinforced it.
After the glue is set screws are used to reinforced it.

A coating of clear sealer is used.
A coating of clear coat is used.

The finished project.
The finished project.

A Safe Site